Part Number Hot Search : 
24000 2N7000 ZS4760A A2010 EMIF0 LB101 FW245 HMT31
Product Description
Full Text Search
 

To Download TGA4510-EPU Datasheet File

  If you can't view the Datasheet, Please click here to try to view without PDF Reader .  
 
 


  Datasheet File OCR Text:
 Advance Product Information
August 5, 2002
29-37 GHz Compact Driver Amplifier
Key Features
* * * * *
TGA4510-EPU
0.25 um pHEMT Technology >16 dB Nominal Gain @ 30 GHz 16 dBm Nominal Psat Bias Conditions: Vd = 6V, Id = 60 mA Compact Chip Size: 1.1 x 0.8 x 0.1 mm3
Primary Applications
* LMDS Point-to-Point Base Stations
Fixtured Measured Performance
Bias Conditions: Vd = 6V, Id = 60 mA 5%
20 18 16 14 Gain (dB) 12 10 8 6 4 2 0 26 28 30 32 34 Frequency (GHz) 36 38 40
* *
20 18 16 14 Pout (dBm) 12 10 8 6 4 2 0 26 28 30
,
Pwr(in) 4 2 0 -2 -4 -6 -8 -10
32 34 Frequency (GHz)
36
38
40
Note: Devices designated as EPU are typically early in their characterization process prior to finalizing all electrical and process specifications. Specifications are subject to change without notice.
TriQuint Semiconductor Texas: Phone (972)994-8465 Fax (972)994 8504 Web: www.triquint.com
1
Advance Product Information
TABLE I MAXIMUM RATINGS 1/ Symbol Parameter + V Positive Supply Voltage + I Positive Supply Current (Quiescent) |IG| Gate Current PD Power Dissipation PIN Input Continuous Wave Power TCH Operating Channel Temperature TM Mounting Temperature (30 seconds) TSTG Storage Temperature 1/ 2/ 3/ 4/ Value 8V 81mA 3.5 mA TBD 18 dBm 150 C 320 C -65 C to 150 C
August 5, 2002 TGA4510-EPU
Notes 2/
3/, 4/
These values represent the maximum operable values of this device Total current for the entire MMIC These ratings apply to each individual FET Junction operating temperature will directly affect the device mean time to failure (MTTF). For maximum life it is recommended that junction temperatures be maintained at the lowest possible levels.
TABLE II ELECTRICAL CHARACTERISTICS (Ta = 25oC 5oC)
Parameter Frequency Band Drain Operating Voltage Gate Operating Voltage Drain Current, Quiescent Typical DC Power Consumption Small Signal Gain Gain Flatness Input Return Loss Output Return Loss TOI (Single Tone Power) @ 30 GHz CW Output Power @ P1dB (dBm)
Units GHz V V mA W dB dB dB dB dBm dBm
Typical 29 - 37 6 -0.6 60 0.36 15.8 - 17.6 < 0.05 >8 > 11 22 14.0 - 16.2
Note: Devices designated as EPU are typically early in their characterization process prior to finalizing all electrical and process specifications. Specifications are subject to change without notice.
TriQuint Semiconductor Texas: Phone (972)994-8465 Fax (972)994 8504 Web: www.triquint.com
2
Advance Product Information
August 5, 2002 TGA4510-EPU
Measured Fixtured Data
Bias Conditions: Vd = 6V, Id = 60mA 5%
20 18 16 14 Gain (dB) 12 10 8 6 4 2 0 26 28 30 32 34 Frequency (GHz) 36 38 40
20 18 16 14 Pout (dBm) 12 10 8 6 4 2 0 26 28 30
,
Pwr(in) 4 2 0 -2 -4 -6 -8 -10
32 34 Frequency (GHz)
36
38
40
Note: Pwr (in) = 0dBm is approximately P1dB (dbM)
Note: Devices designated as EPU are typically early in their characterization process prior to finalizing all electrical and process specifications. Specifications are subject to change without notice.
TriQuint Semiconductor Texas: Phone (972)994-8465 Fax (972)994 8504 Web: www.triquint.com
3
Advance Product Information
August 5, 2002 TGA4510-EPU
Measured Fixtured Data
Bias Conditions: Vd = 6V, Id = 60mA 5%
0 -2
Input Return Loss (dB)
-4 -6 -8 -10 -12 -14 -16 26 28 30 32 34 36 38 40
Frequency (GHz)
0 -2
Output Return Loss (dB)
-4 -6 -8
-10 -12 -14 -16 -18 -20 26 28 30 32 34 36 38 40
Frequency (GHz)
Note: Devices designated as EPU are typically early in their characterization process prior to finalizing all electrical and process specifications. Specifications are subject to change without notice.
TriQuint Semiconductor Texas: Phone (972)994-8465 Fax (972)994 8504 Web: www.triquint.com
4
Advance Product Information
August 5, 2002 TGA4510-EPU
Measured Fixtured Data
Bias Conditions: Vd = 6V, Id = 60 mA 5%, @ 30 GHz
20 18 100 95 90 85
Gain (dB),Pout (dBm)
16 14 12 10 8 6 4 2 0 -10 -8 -6 -4 -2 0 2 4
Gain Pout Id
75 70 65 60 55 50
Pin (dBm)
Bias Conditions: Vd = 6V, Id = 60 mA 5%, @ 36 GHz
20 18 100 95 90 85
Gain (dB),Pout (dBm)
16 14 12 10 8 6 4 2 0 -10 -8 -6 -4 -2 0
Gain Pout Id
75 70 65 60 55 50 4
Pin (dBm)
2
Note: Devices designated as EPU are typically early in their characterization process prior to finalizing all electrical and process specifications. Specifications are subject to change without notice.
Id (mA)
5
80
TriQuint Semiconductor Texas: Phone (972)994-8465 Fax (972)994 8504 Web: www.triquint.com
Id (mA)
80
Advance Product Information
August 5, 2002 TGA4510-EPU
Measured Fixtured Data
Bias Conditions: Vd = 6V, Id = 60 mA 5%, @ 30 GHz
TOI, Fund/Tone, OIP3/Tone (dBm)
30 20 10 0
-10 -20 -30 -40 -50 -60 -70 -20 -18 -16 -14 -12 -10 -8 -6 -4 -2 0 2 4 TOI Fund IMD3
Pin (dBm/tone)
Bias Conditions: Vd = 6V, Id = 60 mA 5%, @ Pin = -10dBm/Tone
30
25
TOI (dBm), Gain (dB)
20
15
10 TOI Gain
5
0 26 28 30 32 34 36 38 40
Frequency (GHz)
Note: Devices designated as EPU are typically early in their characterization process prior to finalizing all electrical and process specifications. Specifications are subject to change without notice.
TriQuint Semiconductor Texas: Phone (972)994-8465 Fax (972)994 8504 Web: www.triquint.com
6
Advance Product Information
August 5, 2002 TGA4510-EPU
Chip Assembly and Bonding Diagram
VG
RF In
RF Out
VD
GaAs MMIC devices are susceptible to damage from Electrostatic Discharge. Proper precautions should be observed during handling, assembly and test.
Note: Devices designated as EPU are typically early in their characterization process prior to finalizing all electrical and process specifications. Specifications are subject to change without notice.
TriQuint Semiconductor Texas: Phone (972)994-8465 Fax (972)994 8504 Web: www.triquint.com
7
Advance Product Information
August 5, 2002 TGA4510-EPU
Mechanical Drawing
GaAs MMIC devices are susceptible to damage from Electrostatic Discharge. Proper precautions should be observed during handling, assembly and test.
Note: Devices designated as EPU are typically early in their characterization process prior to finalizing all electrical and process specifications. Specifications are subject to change without notice.
TriQuint Semiconductor Texas: Phone (972)994-8465 Fax (972)994 8504 Web: www.triquint.com
8
Advance Product Information
August 5, 2002 TGA4510-EPU
Assembly Process Notes
Reflow process assembly notes: * * * * * Use AuSn (80/20) solder with limited exposure to temperatures at or above 300C. An alloy station or conveyor furnace with reducing atmosphere should be used. No fluxes should be utilized. Coefficient of thermal expansion matching is critical for long-term reliability. Devices must be stored in a dry nitrogen atmosphere.
Component placement and adhesive attachment assembly notes: * * * * * * * Vacuum pencils and/or vacuum collets are the preferred method of pick up. Air bridges must be avoided during placement. The force impact is critical during auto placement. Organic attachment can be used in low-power applications. Curing should be done in a convection oven; proper exhaust is a safety concern. Microwave or radiant curing should not be used because of differential heating. Coefficient of thermal expansion matching is critical.
Interconnect process assembly notes: * * * * * Thermosonic ball bonding is the preferred interconnect technique. Force, time, and ultrasonics are critical parameters. Aluminum wire should not be used. Discrete FET devices with small pad sizes should be bonded with 0.0007-inch wire. Maximum stage temperature is 200C.
GaAs MMIC devices are susceptible to damage from Electrostatic Discharge. Proper precautions should be observed during handling, assembly and test.
Note: Devices designated as EPU are typically early in their characterization process prior to finalizing all electrical and process specifications. Specifications are subject to change without notice.
TriQuint Semiconductor Texas: Phone (972)994-8465 Fax (972)994 8504 Web: www.triquint.com
9


▲Up To Search▲   

 
Price & Availability of TGA4510-EPU

All Rights Reserved © IC-ON-LINE 2003 - 2022  

[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy]
Mirror Sites :  [www.datasheet.hk]   [www.maxim4u.com]  [www.ic-on-line.cn] [www.ic-on-line.com] [www.ic-on-line.net] [www.alldatasheet.com.cn] [www.gdcy.com]  [www.gdcy.net]


 . . . . .
  We use cookies to deliver the best possible web experience and assist with our advertising efforts. By continuing to use this site, you consent to the use of cookies. For more information on cookies, please take a look at our Privacy Policy. X